Cross-Linked 3lpe Pipe Pipeline Corrosion Protection Field Joint Wraparound Heat Shrink Sleeve

• Standard: DIN, GB
• Material: Plastic
• Connection: Welding
• Surface Treatment: Black Oxide
• Head Type: Round
• Application: Oil Gas Pipeline Corrosion Protection
• Model NO.: HUASHIDA-3LPE
• Construction: PE+Adhesive
• Transport Package: Pallet
• Specification: 225, 450, 500, 600
• Trademark: HSD
• Origin: Qingdao China
• HS Code: 3920999090
• Production Capacity: 5tons/Day

Product Description

Cross-Linked 3LPE Pipe Pipeline Corrosion Protection Field Joint Wraparound Heat Shrink Sleeve 

INTRODUCTION
Heat shrink sleeve is a corrosion protective coating for steel pipeline.It has different forms: wraparound sleeve, tubular sleeve and wrap tape. Now heat shrink sleeve is the most widely used method of field applied steel pipe corrosion protection in the world.  
Heat shrink sleeve comprises cross-linked polyethylene backing and special hot melt adhesive. It is used together with epoxy primer.Hot melt adhesive has good bonding with PE backing, steel pipe and epoxy layer. By heating PE backing shrinks, the adhesive melts, and closely wraps around the pipe or pipe joint, then it forms together with epoxy a firm and continuous anti-corrosion body. It is resistant to corrosion, abrasion, impact, UV and aging.  
The heat shrink wrap tape can be used for wrapping the pipe bends or the whole pipe to get a protection coating which is equal to the factory-applied mainline coating.

 



Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.

Feature of our heat shrinkable sleeve:
1.fast shrinkage speed,
2.good waterproof performance,
3 good anti-corrosive performance,
4.long service life
5.using pure PE material and imported adhesive for ensuring the quality

Executive Standard
Products comply with national and international standards GB/T23257-2009, SY/T4054-2003, EN12068, DIN30672 etc.

 
CONSTRUCTION CASE
Heat shrinkable sleeve for Oil & Gas Pipe

TECHNICAL PARAMETERS
 

NO	Test Item			Unit	Performance	Test Result	Test Method
PE BACKING
1	Tensile Strength			MPa	≥17	19.47	ASTM D638
2	Elongation			%	≥400	626	ASTM D638
3	Vicat Softening Point			ºC	≥90	92	ASTM D1525
4	Brittleness Temperature			ºC	<-65	<-65	ASTM D2671C
5	Dielectric Strength			MV/m	≥25	33.13	ASTM D149
6	Volume Resistivity			Ω.m	≥1*10^13	1.1*10^13	ASTM D257
7	Environment Stress Crack			h	≥1000	>1000	GB/T1842
8	Chemical resistance (7d)	10% HCl	Tensile strength	MPa	≥85	104.9	ASTM D638
			Elongation	%	≥85	96.3	ASTM D638
		10% Naah	Tensile strength	MPa	≥85	102.1	ASTM D638
			Elongation	%	≥85	95.6	ASTM D638
		10% NaCl	Tensile strength	MPa	≥85	108.3	ASTM D638
			Elongation	%	≥85	94.1	ASTM D638
9	Thermal aging (150ºC,168h		Tensile strength	MPa	≥14	20.7	ASTM D638
			Elongation	%	≥300	630	ASTM D638

 

NO.	Test Item		Unit	Performance	Test Result	Test Method
ADHESIVE
1	Softening Point		ºC	≥90	90.1	ASTM E28
2	Brittleness Temperature		ºC	<-15	<-15	ASTM D2671C
3	Lap Shear		MPa	≥1.0	1.5	ASTM D1002
4	Peel Strength (23±2ºC	Steel	N/cm	≥70	145.6	ASTM D1000
		Primer	N/cm	≥70	205.9	ASTM D1000
		PE layer	N/cm	≥70	190.0	ASTM D1000
Non-solvent Epoxy Primer
5	Shear of cured primer		MPa	≥5.0	12	SY/T0041

Wraparound heat shrink sleeve specification
Thickness 2-3mm

No.	Size, mm	Length, mm	Patch
			Length, mm	Width, mm
1	Ф159*500	670	500	80
2	Ф219*500	860		100
3	Ф273*500	1000		100
4	Ф325*500	1200		100
5	Ф355*500	1300		100
6	Ф406*500	1460		120
7	Ф508*500	1800		120
8	Ф610*500	2170		120
9	Ф711*500	2500		150
10	Ф813*500	2880		150
11	Ф1016*500	3480		150
12	Ф1219*500	4120		200
13	Ф1420*500	4780		200

Specification of heat shrinkable belt

Width (mm)	Length	Thickness
100	The standard length is 5, 10, 15, 20, 30 meters per roll.	2-3mm
150
200
300
450
600

 

Workshop

Inspection&Delivery