Fiber Reinforced Heat Shrinkable Sleeve for HDPE Corrugated Drainage Pipeline fitting
INTRODUCTION
PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, On the basic of the original product(heat shrinkable sleeve/belt with 2 layers) Qingdao Huashida Machinery Co., Ltd. has developed the 3-layer fiber reinforced PE heat shrinkable sleeve/belt is composed of cross-linked polyethylene back, a middle layer of fiber and special heat melt adhesive. The 3 layer reinforced sleeve/belt gives better shrink ratio, and better strength. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.
Wraparound products
Application area:
- For metal reinforced HDPE corrugated pipe (drainpipe)
- HDPE Plastic manhole/well
Specification of Heat Shrinkable Sleeve for HDPE spiral pipe and metal reinforeced corrugated pipe
Pipe Diameter, mm |
Length, mm |
Width, mm |
DN300 |
1200 |
300 |
DN350 |
1430 |
300 |
DN400 |
1600 |
300 |
DN450 |
1770 |
300 |
DN500 |
1900 |
300 |
DN600 |
2300 |
300 |
DN700 |
2560 |
300 |
DN800 |
2900 |
400 |
DN900 |
3250 |
400 |
DN1000 |
3600 |
400 |
DN1200 |
4250 |
400 |
DN1400 |
4940 |
500 |
DN1500 |
5290 |
500 |
DN1600 |
5630 |
500 |
DN1800 |
6320 |
500 |
DN2000 |
7010 |
500 |
DN2200 |
7700 |
500 |
DN2400 |
8390 |
500 |
Remark: The above table is standard size, satisfied with requirements of . Production will be according to the buyer's requirements.
CONSTRUCTION CASE
COMPARISIONS
TECHNICAL PARAMETERS
We are also producing machine of heat shrinkable sleeve, You are welcom to ask for more information.