Electrofusion Tape Belt Welding Manufacturer for Connection of PE Structural Wall Pipe

• Customization: Available
• Material: HDPE/PE
• Connection: Welding
• Model NO.: 200mm-3000mm
• Surface Treatment: Without Treatment
• Head Type: Round
• Applicationpipeline Joint Closure: Pipeline Joint Closure
• Usage: Weld HDPE Pipe
• Thickness: 2-18mm
• Certify: En253, En448, En728, ISO1133, ISO8501-1. ISO9001
• Width: 100-700mm
• Transport Package: Standard Package
• Specification: 1200.00cm *1000.00cm * 1000.00cm
• Trademark: Huashida
• Origin: Qingdao China
• HS Code: 8477209000
• Production Capacity: 2000sets/Day
• Package Size: 1200.00cm * 1000.00cm * 1000.00cm
• Package Gross Weight: 1000.000kg

Product Description

Electrofusion Tape Belt  welding Manufacturer for Connection of PE Structural Wall Pipe
 

Product Description

It is a kind of connecting pipe fitting what is widely used on anti-corrosion, especially on Directly buried pre-insulated pipes field joint. It is made by Polyethylene sheets complex with the electro-fusion wire.
This  is a type of heat shrink anti-corrosion material designed for anti-corrosion and insulation joint repair of buried steel pipelines, and can also be used for sealing and anti-corrosion of pipeline flange connections. It is composed of radiation cross-linked polyolefin substrate and special sealing hot melt adhesive. The special sealing hot melt adhesive can form good adhesion with polyolefin substrate, steel pipe surface, and solid epoxy coating. When the heat shrink sleeve is heated and installed, the substrate shrinks radially, while the internal composite adhesive layer melts and tightly wraps around the joint, forming a strong anti-corrosion body outside the pipeline together with the substrate. It has excellent wear resistance, corrosion resistance, impact resistance, and good resistance to ultraviolet radiation and photoaging.

Test report
 

Final Test	Unit	Standard	Test Result	Assess
HDPE Raw material density	g/cm 3	≥0.935	0.961	OK
Raw material melt flow rate	g/10min	≤0.50	0.46	OK
Appearance check	/	Inernal and external surfaces is clean and free from other defects.	OK	OK
Heat reversion	%	≤3;shall not show any cracks	0.89,No cracks	OK
Tensile yield strength	Mpa	≥19	20.2	OK
Elongation at break	%	≥350	656	OK
Stress crack resistance	h	≥300	OK	OK

 

Performance

1. Waterproof; High adhesion, good airtightness, corrosion resistant capacity, long service life and convenient operation
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.

Feature

 

1. Customer reputation

Customers can complete higher quality projects by using high-quality pipeline accessories, and the quality of cooperation with Huashida is guaranteed!

2. Application scope

Mainly used in the fields of petrochemical anti-corrosion, thermal pipeline network anti-corrosion, steel pipe anti-corrosion, long-distance oil and gas pipeline interface anti-corrosion, urban gas pipeline interface anti-corrosion, heating steel pipe interface anti-corrosion, water pipe interface anti-corrosion, etc.

3. Product classificationAccording to the on-site construction environment, heat shrinkable tapes can be divided into open and closed types. Supporting products include EVA adhesive strips and fixing sheets, repair sheets, and solvent-free epoxy primer.

 

Product Parameters

 

Specification
Steel pipe outside diameter (mm)		PE outside casing diameter (mm)		Width(mm)	Tic.mm
DN159		285		600	4
DN219		315		600	4
DN273		365		600	4
DN325		420		600	5
DN377		500		600	5
DN426		550		600	6
DN478		630		600	6
DN529		655		600	6
DN630		760		600	8
DN720		850		600	8
DN820		960		600	10
DN920		1054		600	10
DN1020		1155		600	12
DN1220		1380		600	12
Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final Test	Unit	Standard	Test Result	Result
Raw material density	g/cm 3	≥0.935	≤0.961	PASS
Raw material melt flow rate	g/10min	≤0.50	0.46	PASS
Appearance check	/	Inernal and external surfaces is clean and free from other defects.	Pass	PASS
Heat reversion	%	≤3;shall not show any cracks	0.89,No cracks	PASS
Tensile yield strength	Mpa	≥19	20.2	PASS
Elongation at break	%	≥350	656	PASS
Stress crack resistance	h	≥300	Pass	PASS

 

Application Scenarios

Application:
1.    District thermal heating system construction,
2.    Pre-insulated pipes field joint welding and oil pipes joint welding;
3.    Preinsulated bonded pipe system for directly buried hot water networks;
4.    Three PE/PP layers with foam jacket insulation pipes connection;
5.    Steel pipes anti-corrosion etc.
 

 

Packaging & Shipping

Company Profile

Qingdao Huashida Machinery Co., LTD, is a manufacturer of series of plastic pipe machines, municipal pipe machines, pipe insulation&anticorrosion machines, and pipe jointing&anticorrosion materials, with 21 years of production experience. 
Our main products are:
1. HDPE jacket pipe for pre-insulated pipe Production Line 
2. Rigid pre-insulated pipe Production Line
3. Flexible pre-insulated pipe(PERT) production line
4. Steel pipe FBE/2LPE/3LPE anti-corrosion coating line
5. Steel pipe derusting line
6. PE pressure pipe/Water Gas supply pipe production line
6. PP/PE plastic board/sheet/geomembrane production line
7. NBR PVC Thermal insulation tube/plate production line  
8.Pipeline anti-corrosion materials and instruments: heat shrink joint coating sleeve, electro-fusion weldable joint sleeve, portable welding gun(extruder), PE PP welding rod. 
We have been working with more than 400 overseas customers and exporting our products to Kazakhstan, Uzbekistan, Iran, Turkey, Russia, Nigeria and other countries.

Factory overview

Certifications