PE Heat Shrink Shrinkable Tape for Steel Pipe Girth Weld Field Joint Corrosion Protection

• Customization: Available
• Customized: Customized
• Application: Metallurgy, Chemical, Petroleum
• Model NO.: 450
• Certification: CE
• Material: LDPE
• Feature: Insulation
• Max Operation Temperature: 90ºC
• Size: According to Customer′s Requirements
• Construction: PE+Adhesive
• Transport Package: Standard Package
• Specification: 100-800
• Trademark: HUASHIDA
• Origin: Qingdao China
• HS Code: 3920999090
• Production Capacity: 1000PCS/Day

Product Description

PE Heat Shrink Shrinkable Tape for Steel Pipe Girth Weld Field Joint Corrosion Protection

Product introduction
PE backed heat shrinkable wraparound sleeve (HSS) for pipeline is composed of radiation cross-linked polyethylene backing and special heat melt adhesive.
There is also a reinforced type, in which a glass fiber reinforced layer is added to the backing for better effect.
When heating the heat shrink sleeve, the PE backing shrinks and the adhesive melts. The sleeve closely wraps around the pipe. The heat shrinkable sleeve (HSS) forms a firm and continuous anti-corrosion body, which is resistant to corrosion, wear, impact, UV and aging.



Application:
1. Field joint corrosion protection for gas oil steel pipeline, water supply pipeline.

2.Corrosion protection pipes, bends, fittings of pipeline.

3.Anti-corrosion and seal for heating pipeline

4.Connecting and seal for corrugate pipes (sewage pipe, waste pipe, drain pipe).

Feature of our heat shrinkable sleeve:
1.Fast shrinkage speed
2.Good waterproof performance
3 Good anti-corrosive performance
4.Long service life
5.High-quality PE material and adhesive

Executive Standard
Products comply with national and international standards GB/T23257-2009, SY/T4054-2003, EN12068, DIN30672 etc.

Ordering information
·pre-cut sleeve and separate closure patch
·tubular sleeve
·tape in roll (closure patch to be ordered separately)

The reinforced type:



 CONSTRUCTION CASE
Heat shrinkable sleeve for Oil & Gas Pipe

Heat shrinkable sleeve for sealing thermo-Insulated Pipe


Specification of heat shrinkable sleeve for field joint coating underground buried steel pipe 

No.	Size, mm	Length, mm	Patch
			Length, mm	Width, mm
1	Ф159*500	670	500	80
2	Ф219*500	860		100
3	Ф273*500	1000		100
4	Ф325*500	1200		100
5	Ф355*500	1300		100
6	Ф406*500	1460		120
7	Ф508*500	1800		120
8	Ф610*500	2170		120
9	Ф711*500	2500		150
10	Ф813*500	2880		150
11	Ф1016*500	3480		150
12	Ф1219*500	4120		200
13	Ф1420*500	4780		200

 

TECHNICAL PARAMETERS

NO	Test Item			Unit	Performance	Test Result	Test Method
Back Material
1	Tensile Strength			MPa	≥17	19.47	ASTM D638
2	Elongation			%	≥400	626	ASTM D638
3	Vicat Softening Point			ºC	≥90	92	ASTM D1525
4	Brittleness Temperature			ºC	<-65	<-65	ASTM D2671C
5	Dielectric Strength			MV/m	≥25	33.13	ASTM D149
6	Volume Resistivity			Ω.m	≥1*10^13	1.1*10^13	ASTM D257
7	Environment Stress Crack			h	≥1000	>1000	GB/T1842
8	Chemical resistance	10% HCI	Tensile strength	MPa	≥85	104.9	ASTM D638
			Elongation	%	≥85	96.3	ASTM D638
		10% NaAH	Tensile strength	MPa	≥85	102.1	ASTM D638
			Elongation	%	≥85	95.6	ASTM D638
		10% NaCL	Tensile strength	MPa	≥85	108.3	ASTM D638
			Elongation	%	≥85	94.1	ASTM D638
9	Thermal aging (150ºC,168h)		Tensile strength	MPa	≥14	20.7	ASTM D638
			Elongation	%	≥300	630	ASTM D638

 

NO.	Text Item		Uni	Performance	Text Result	Text Method
Adhesive
1	Softening Point		ºC	≥90	90.1	ASTM E28
2	Brittleness Temperature		ºC	<-15	<-15	ASTM D2671C
3	Lap Shear		MPa	≥1.0	1.5	ASTM D1002
4	Peel Strength (23±2ºC	Steel	N/cm	≥70	145.6	ASTM D1000
		Primer	N/cm	≥70	205.9	ASTM D1000
		PE layer	N/cm	≥70	190.0	ASTM D1000
Non-solvent Epoxy Primer
5	Shear of cured primer		MPa	≥5.0	12	SY/T0041

Workshop

Customer visiting


We are also producing machine of heat shrinkable sleeve, You are welcom to ask for more information. 

Welcome to visit our factory!