Heat Shrinkable Tape for Anti Corrision Steel Tube 3 Polyethylene

• Customization: Available
• Transport Package: Standard Pakage
• Trademark: HSD
• Origin: Qingdao, China
• Production Capacity: 5000 Pieces/Day

Product Description

Heat shrinkable tape for anti corrision steel tube 3 polyethylene

You're familiar with Qingdao Huashida, the industry leader in corrosion protection and sealing in CHINA. Advanced manufacturing plant; advanced technologies; advanced products; advanced performance.


Feature
Fast shrinkage speed, good waterproof performance, good anti-corrosive performance, long service life, convenient transportation and fast construction. 


Application scope
Heat shrink sleeve is mainly used for heat pipe network, steel pipe corrosion resistance and insulation, chemical pipes and sewage pipes etc
installation
When heat is applied to the sleeve wrapped around a joint, the adhesive melts and becomes a liquid while the sleeve backing begins to shrink. The radial shrinking forces of the sleeve squeezes the fluid adhesive into all the pipe surface irregularities, while the sleeve conforms tightly to the joint profile. On cooling, the adhesive solidifies, creating a tough bond to the pipe and the coating.

 

TECHNICAL PARAMETERS OF HEAT SHRINK SLEEVE TAPE TUBING

NO	Text Item			Unit	Performance	Text Result	Text Metho
Back Material
1	Tensile Strengt			MPa	≥17	19.47	ASTM D638
2	Elongatio			%	≥400	626	ASTM D638
3	Vicat Softening Poin			ºC	≥90	92	ASTM D1525
4	Brittleness Temperatur			ºC	<-65	<-65	ASTM D2671C
5	Dielectric Strengt			MV/m	≥25	33.13	ASTM D149
6	Volume Resistivit			Ω.m	≥1*10^13	1.1*10^13	ASTM D257
7	Environment Stress Crac			h	≥1000	>1000	GB/T1842
8	Chemical resistance (7d	10% HCI	Tensile strength	MPa	≥85	104.9	ASTM D638
			Elongation	%	≥85	96.3	ASTM D638
		10% NaAH	Tensile strength	MPa	≥85	102.1	ASTM D638
			Elongation	%	≥85	95.6	ASTM D638
		10% NaCL	Tensile strength	MPa	≥85	108.3	ASTM D638
			Elongation	%	≥85	94.1	ASTM D638
9	Thermal aging (150ºC,168h		Tensile strength	MPa	≥14	20.7	ASTM D638
			Elongation	%	≥300	630	ASTM D638

 

NO.	Text Ite		Uni	Performanc	Text Resul	Text Metho
Adhesive
1	Softening Poin		ºC	≥90	90.1	ASTM E28
2	Brittleness Temperatur		ºC	<-15	<-15	ASTM D2671C
3	Lap Shea		MPa	≥1.0	1.5	ASTM D1002
4	Peel Strength (23±2ºC	Steel	N/cm	≥70	145.6	ASTM D1000
		Primer	N/cm	≥70	205.9	ASTM D1000
		PE laye	N/cm	≥70	190.0	ASTM D1000
Non-solvent Epoxy Primer
5	Shear of cured primer		MPa	≥5.0	12	SY/T0041