Plastic Extrusion hand tool Extruder machine Welding Gun Welder
Model: HJ-30B
Voltage: 220V
Power Of Extruder: 1020W
Power Of Hot Blower: 3400W
Welding Rate: 3KG/5mm
Machine Weight: 4.8Kg
APPLICATION:
1. Welding PE and PP thermoplastics for application in Container engineering
2. Plastic fabrication
3. Make plastic tanks, seal chemical tanks
4. Landfill sites and abandoned polluted areas
The machine has absorbed the technology from the similar products of Germany and Itlay and adopted imported hot machine. Due to large power, the ext rusion volume could reach 3KG. Its performance is stable. The integrated design is adopted for the preheating air and screw extruder. The plasticizing quality is good and the mould design is smooth without any blockage. Also, there is no dead corner and carbonization. The fan imported from Switzerland is installed to ensure large air output, adequa te heat and the base materials will have a higher temperature prior to adhesion in order to achieve good melting effect. The machine could be operated simply and light in weight, only 4kg, whichhelps to weld the postion that is difficult to reach.
The build-in blower series make unnecessary any external air supply and they facilitate any in-field operation. The equipment are designed by ourselves. The hand extruder are suitable for plastic fabrication of chemical hoods, custom plastic tanks, non woven geomembrane sealing and more.
| Model |
HJ-30A |
HJ-30B |
| Voltage |
220V~230V |
220V~230V |
| Power (Hot Air) |
2000W |
3400W |
| Air Volume |
300 L/min |
500 L/min |
| Air Temperature |
20-650 degree |
20-650 degree |
| Motor Power |
1100W |
1100W |
| Material |
PE / PP / PVC(especially designed for PVC welding) |
PE / PP |
| Welding Speed |
2.8 KG/ dim 4mm rods |
3.0 KG/ dim 4mm rods |
| Diameter of welding rod |
dim 3.0mm -dim4.0mm |
dim 3.0mm - dim 4.0mm |
| Weight |
5.5 Kg |
4.8 Kg |
| Temperature Control |
Temperature controller |
potentiometer |
Audited Supplier 
){kind=link}