Polyethylene PE HDPE Corrugated Sewer Wastewater Drainage Pipe Electro-Fusion Welding Tape
It is a kind of connecting pipe fitting that is widely used on anti-corrosion, especially on steel reinforced corrugated pipes field joints. It is made of Polyethylene sheets complex with the electro-fusion wire.
Feature electrofusion belt:
1. According to the pipe corrugated process, the peak valley width is usually from 60mm to 80mm, the Narrow tape welding the pipe joint along the cutting edges.
2. Because of various restrictions, can not guarantee the airproof capability after the pipe joint is welded.
3. The best way to weld the joint should use the Hand extruder to weld the cutting edges inside of the pipe first, then use the narrow tape welding it from outside.
Performance electrofusion belt:
1. Waterproof;
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand the effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.
| Specification |
| Metal reinforced polyethylene spirally corrugated pipe diameter |
Size Length× Width× Thickness |
| DN600 |
2184× 50× 7 |
| DN700 |
2197× 50× 7 |
| DN800 |
2850× 60× 7 |
| DN900 |
3200× 60× 7 |
| DN1000 |
3500× 60× 7 |
| DN1100 |
3650× 60× 9 |
| DN1200 |
4030× 70× 9 |
| DN1300 |
4432× 70× 9 |
| DN1400 |
4750× 70× 9 |
| DN1500 |
5000× 70× 9 |
| DN1600 |
5287× 70× 9 |
| DN1800 |
5915× 70× 9 |
| DN2000 |
6542× 70× 9 |
Audited Supplier 
){kind=link}
){kind=link}