Oil Gas Pipeline Heat Shrinkable Tape for Field Joint Girth Weld Protecting Anticorrosion Coating

• Customization: Available
• Customized: Customized
• Application: Construction, Metallurgy, Chemical, Petroleum
• Model NO.: HTLP60 HTLP80
• Certification: ISO, CE
• Material: LDPE
• Feature: Insulation
• Structure: PE Backing+Adhesive
• Usage: Field Joint Coating
• Operation Temperature: 60c
• Transport Package: Standard Package
• Specification: 450, 500, 600
• Trademark: HSD
• Origin: Qingdao China
• HS Code: 3920999090
• Production Capacity: 3 Tons/Day

Product Description

Oil Gas Pipeline Heat Shrinkable Tape for Field Joint Girth Weld Protecting Anticorrosion Coating

INSTRUSTION
PE backed heat shrinkable tape for pipeline is composed of two layers: radiation cross-linked polyethylene backing and special heat melt adhesive. The heat shrinkable sleeve is applied together with a solvent-free two-component epoxy primer to form a three-layer polyethylene anti-corrosion coating (3LPE) , which replicates the structure and performance of 3LPE coating in factory conditions, providing effective and long-term anti-corrosion for the welding joint of the steel pipe.

During installation, the epoxy is applied to the prepared pipe surface and the heat-shrinkable sleeve is immediately wrapped around the joint over the wet epoxy. Heat is then applied to the sleeve which shrinks to form a tight fit around the joint. While curing, the epoxy forms strong mechanical and chemical bonds to the pipe surface and to the copolymer adhesive layer. The radiation cross-linked outer layer forms a tough barrier against mechanical damage and moisture transmission.


Application:
1. Field joint corrosion protection for gas oil steel pipeline.

2.Field joint corrosion protection for water supply steel pipeline.

3.3LPE coating repairing.

Feature of our heat shrinkable sleeve:

1. Brand new PE material and adhesive
2. Strict quality control
3. Fast shrinkage speed
4. Good waterproof performance
5. Good anti-corrosive performance
6. Long service life
7. Easy operation

Executive Standard
Products comply with national and international standards GB/T23257-2009, SY/T4054-2003, EN12068, DIN30672, GOST R51164-98 etc.

TECHNICAL PARAMETERS 

NO	Test Item			Unit	Performance	Test Result	Test Method
Back Material
1	Tensile Strength			MPa	≥17	19.47	ASTM D638
2	Elongation			%	≥400	626	ASTM D638
3	Vicat Softening Point			ºC	≥90	92	ASTM D1525
4	Brittleness Temperature			ºC	<-65	<-65	ASTM D2671C
5	Dielectric Strength			MV/m	≥25	33.13	ASTM D149
6	Volume Resistivity			Ω.m	≥1*10^13	1.1*10^13	ASTM D257
7	Environment Stress Crack			h	≥1000	>1000	GB/T1842
8	Chemical resistance	10% HCI	Tensile strength	MPa	≥85	104.9	ASTM D638
			Elongation	%	≥85	96.3	ASTM D638
		10% NaAH	Tensile strength	MPa	≥85	102.1	ASTM D638
			Elongation	%	≥85	95.6	ASTM D638
		10% NaCL	Tensile strength	MPa	≥85	108.3	ASTM D638
			Elongation	%	≥85	94.1	ASTM D638
9	Thermal aging (150ºC,168h)		Tensile strength	MPa	≥14	20.7	ASTM D638
			Elongation	%	≥300	630	ASTM D638

 

NO.	Text Item		Uni	Performance	Text Result	Text Method
Adhesive
1	Softening Point		ºC	≥90	90.1	ASTM E28
2	Brittleness Temperature		ºC	<-15	<-15	ASTM D2671C
3	Lap Shear		MPa	≥1.0	1.5	ASTM D1002
4	Peel Strength (23±2ºC	Steel	N/cm	≥70	145.6	ASTM D1000
		Primer	N/cm	≥70	205.9	ASTM D1000
		PE layer	N/cm	≥70	190.0	ASTM D1000
Non-solvent Epoxy Primer
5	Shear of cured primer		MPa	≥5.0	12	SY/T0041

Ordering information
A set of products includes heat shrinkable sleeve, closure patch and individually packaged epoxy primers.


Max operating temperature: 60ºC
HSDS 60 is available:
·pre-cut sleeve and separate closure patch
·tubular sleeve
·tape in roll (closure patch to be ordered separately)


Specification of the pre-cut heat-shrinkable sleeve and seperate closure patch (or customized)

Thickness: 1.5-3.5mm

No.	Size, mm	Length, mm	Patch
			Length, mm	Width, mm
1	Ф159*500	670	500	80
2	Ф219*500	860		100
3	Ф273*500	1000		100
4	Ф325*500	1200		100
5	Ф355*500	1300		100
6	Ф406*500	1460		120
7	Ф508*500	1800		120
8	Ф610*500	2170		120
9	Ф711*500	2500		150
10	Ф813*500	2880		150
11	Ф1016*500	3480		150
12	Ф1219*500	4120		200
13	Ф1420*500	4780		200

Specification of heat shrinkable tape in roll (or customized)

Width (mm)	Length	Thickness
100	The standard length is 5, 10, 15, 20, 30 meters per roll.	PE layer  1.2mm Hot melt adhesive layer, 0.8mm
150
200
300
450
600

HUASHIDA is a Heat Shrink Sleeve manufacturer with 20 years of production experience.
The HUASHIDA Heat Shrink Sleeves have been exporting to many countries and win good reputation.
HUASHIDA at international exhibitions
Certificates
HUASHIDA production park view
HUASHIDA team