| Customization: | Available |
|---|---|
| Material: | Plastic |
| Connection: | Welding |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PE Electricfusion Girth Welding Joint Sleeve/Electro Fusion Band for Hollow Wall Spiral Pipe
INTRODUCTION
PE electro fusion sleeve is composite with PE back board and electrical wire which is pressed into PE back board by special lamination device. It is a kind of welding material of kinds of plastic pipes.
Composition
PE back board Electrical wire Others
Application area:
It is usually wider than that for metal reinforced corrugated pipe, is mainly used as joint of Hollow wall (structured wall) rewinding pipe.
CONSTRUCTION CASE
Hollow wall (structured wall) rewinding pipe
| Diameter | Length×width×thickness, mm | Nicochrome net width, mm |
| DN200 | 900×200×7 | 50 |
| DN250 | 1060×200×7 | 50 |
| DN300 | 1240×200×7 | 50 |
| DN350 | 1410×200×7 | 50 |
| DN400 | 1590×200×7 | 50 |
| DN450 | 1820×350×9 | 50 |
| DN500 | 1990×350×9 | 50 |
| DN600 | 2350×350×9 | 50 |
| DN700 | 2690×450×9 | 50 |
| DN800 | 3030×450×9 | 50 |
| DN900 | 3430×450×9 | 50 |
| DN1000 | 3780×450×9 | 50 |
| DN1100 | 4185×450×9 | 50 |
| DN1200 | 4585×450×9 | 50 |
| DN1300 | 5010×450×9 | 50 |
| DN1400 | 5430×450×9 | 50 |
| DN1500 | 5640×450×9 | 50 |
| DN1600 | 6080×450×9 | 50 |
| DN1800 | 6730×450×9 | 50 |
| DN2000 | 7435×500×9 | 50 |
| DN2200 | 8150×500×9 | 50 |
Test report
| Final Test | Unit | Standard | Test Result | Assess |
| HDPE Raw material density | g/cm 3 | ≥0.935 | 0.961 | OK |
| Raw material melt flow rate | g/10min | ≤0.50 | 0.46 | OK |
| Appearance check | / | Internal and external surfaces are clean and free from other defects. | OK | OK |
| Heat reversion | % | ≤3; shall not show any cracks | 0.89, No cracks | OK |
| Tensile yield strength | Mpa | ≥19 | 20.2 | OK |
| Elongation at break | % | ≥350 | 656 | OK |
| Stress crack resistance | h | ≥300 | OK | OK |
OUR WORKING PLANT
){kind=link}