Puf Thermal Insulation PE HDPE Jacket Shell Casing Pipe Extrusion Line 110-1200mm

• Customization: Available
• After-sales Service: Overseas Installation, Free Technical Supporting
• Warranty: 12 Months
• Model NO.: PE-110/600, PE-600/1200
• Type: Pipe Extruder
• Plastic Processed: PE
• Product Type: Extrusion Molding Machine
• Feeding Mode: One Feed
• Assembly Structure: Separate Type Extruder
• Screw: Single-Screw
• Engagement System: Full Intermeshing
• Screw Channel Structure: Deep Screw
• Exhaust: Don't Exhaust
• Automation: Automatic
• Computerized: Computerized
• Application: for Producing Pre-Insulated Pipe Jacket
• Pipe Diameter: From 110-1200mm
• Raw Material: PE
• Transport Package: Standard Package
• Specification: 26-38m
• Trademark: HSD
• Origin: Qingdao China
• HS Code: 8477209000
• Production Capacity: 1000unit/Year

Product Description

Puf Thermal Insulation PE HDPE Jacket Shell Casing Pipe Extrusion Line 110-1200mm



---Pipe diameter range: 110-600mm 365-760mm 500-960mm 655-1380mm 960-1680mm
---The extrusion line comprises equipment and devices as below,
    1set   Vacuum loader 
    1set   Hopper dryer
    1set   High-efficiency single screw extruder
    1set   25/25 single screw extruder for mark line 
    1set   Vacuum calibration table 
    1set   Water spraying tank
    1set    Hauling machine
    1set   Cutting machine
    1set   Stacker
 
 

Style	PE-365/760	PE-500/960	PE-655/1380	PE-960/1680
Main extruder	SJ-90/33	SJ-90/33	SJ-120/33	SJ-150/33
Pipe diameter	Φ365-760mm	Φ 500-Φ 960 mm	Φ 655-Φ1380 mm	Φ 960-Φ 1680mm
Capacity	550-700kg/h	550~700 kg/h	700~900 kg/h	800-1200kg/h
Installed power	360kw	380kw	440kw	580kw
Length	35m	36 m	40 m	48m

I. Pipe Usage
---HDPE jacket pipe is out case of thermal insulating pipe, which is widely used in central heating, oil, nature gas and other industrial area. 





II. Machine Advantages
---High-efficiency extruder gives larger output, stable performance. 
For example
SJ90/33---600-700kg/h 
SJ120/33---800-900kg/h
SJ150/33---1000-1200kg/h
---Compared with inflating method (internal pressure method)
1. For 24 hours working, it reduces 2-3 workers for each shift.
2. There is less waste pipe and material, no need for workers to crush waste material. 
3.  High-efficiency. 
4. Pipe wall is average and smooth, to reduce waste of raw material, and pipe thickness is adjustable.
5.  No need trim edge, once forming. 

III. Main machine- High-efficiency single screw extruder
---Single screw is with barrier & mixing head; barrel is a new model with slotting (channel), Both make the security of good jellification, large output and stable performance.

IV. Controlling system 
The complete line could be controlled by PLC, with the good human-machine interface, all technical parameters could be set and indicated by touching the screen. The controlling system is designed according to the customer's requirement, to be with PLC, or without.   



V. Electrical system
---ABB frequency converter or EUROTHERM speed controller
---Japan RKC temperature controller
--- SIEMENS AC contactors


Our factory


Workshop

Delivery

Customer visiting