| Customization: | Available |
|---|---|
| Warranty: | 12 Monthes |
| Product Type: | PE Pipe |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Gas HDPE Pipe Extrusion Line Small Size (20-63mm)
HDPE Water Supplying Pipe Extrusion Line
---Pipe diameter range:
16-63mm, 75-250mm, 160-315mm, 200-450mm, 315-630mm, 500-800mm, 710-1000mm, 800-1200mm
---The extrusion line comprise equipments and devices as below,
1set Vacuum loader
1set Hopper dryer
1set Single screw extruder
1set 25/25 single screw extruder for mark line
1set Vacuum calibration table
1set Water spraying tank / Cooling water tank(stainless steel)
1set Hauling machine
1set Cutting machine
1set Stacker
I. Pipe advantages and Usage
---HDPE water supplying pipe is with advantages of good hot melt, flexibility, corrosion resistance, and aging tolerance.
---- HDPE pipe is widely used in municipal water supplying, city gas transportation and other areas.
II. Main machine- High-effeciency single screw extruder
---Single screw is with barreir & mixing head; barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.
III. Spiral dihead & 25/25 co-extruder for mark line
---Diehead is spiral model. It has advantages of low melt temperature, good mixing, low cavity pressure, and stable performance.
----Special calibrating and cooling system. We use water film lubrication and water-ring cooling to fit for requirements of HDPE and PP material, to make sure accurate diameter and roundness of thick wall pipe when they are extruded at high speed.
IV. Controlling system
The complete line could be controlled by PLC, with good human-machine interface, all technical parameters could be set and indicated by touching screen. Controlling system is designed according to the customer;s requirement, to be with PLC, or without.
| Available material | PE |
| Pipe diameter range | 16 _ 63 mm |
| Max output | SJ-65/30: SJ-25/25B |
| Control mode | PLC(Siemens ) |
| Consumption of recycling cooling water | ≤15,0.15-0.2MPa,0.5 m3/min |
| Requirement of compressed air | 0.3m3/min >0.5MPa |
| Dimension | 26000 mm×1800 mm×3000 mm |
Container Delivery
){kind=link}