Pipeline Anti Corrosion Heat Shrink Sleeve/Tape/Wrap polyethyleneHSSC-1 Heat shrinkable sleeve (2 layers), which are developed and manufacture by Qingdao Huashida machinery Co., Ltd for anti-corrosion of pipeline, are the composition of radiation cross-linked polyethylene backing and high shearing strengthen melt adhesive, and have the function of shape memory. The hot melt adhesive is squeezed into the joint by the shrink power to form a perfectly sealed surface, after being heated. HSSC-1 is compatible with standard pipe coating, also can be used for coating bare, replacement pipe section and large radius bends. The system is designed to be applied with minimum preheating and is ideal for large diameter wastewater pipe.
FeatureFast shrinkage speed, good waterproof performance, good anti-corrosive performance, long service life, convenient transportation and fast construction. The product are ideal material for corrosion prevention and insulation.
Raw material with high quality
---3 Layer PE Coating Pipe
---Oil, Gas,Water pipeline
---Pipeline size: from Ø 108 to Ø 1554 ( 4''---60'')
Sleeves width: 100mm, 150mm,200mm, 300mm,450mm,500mm,600mm,900mm
Closure patch: 100mm, 150mm,200mm (4'', 6'', 8'')
Application scopeIt's mainly used for heat pipe network, steel pipe corrosion resistance and insulation, chemical pipes and sewage pipes, etc
|Adhesive||softening point||ASTM E 28||°C||70-80|
|shear strength||DIN 30 672||N/cm||≥100|
|Basic||specific density||ASTM D792||r/cm 3||0.935-0.96|
|tensile strength||ASTM D638||Mpa||15-20|
|Elongation at break||ASTM D792||%||350|
|Heat Shrinkable Sleeve||peel strength||ASTM D1000||N/cm||>150|
|water-intake rate||ASTM D570||%||0.05|