Electro-Fusion Weldable Joint/Fitting for PE Pipe/Waste Water Pipe/Pre-Insulated Pipe

• Customization: Available
• Material: Plastic
• Connection: Welding
• Model NO.: HSD
• Application: Pipe Joint Fitting
• Material of Band: PE and Electrothermal Wire Net
• Tape Size: Customized
• Usage: Heating System Construction
• Performance: Long Life Service
• Transport Package: Standard Package
• Specification: 200mm-2000mm
• Trademark: HSD
• Origin: Qingdao, China
• HS Code: 3921909090
• Production Capacity: 5tons/Day

Product Description

Electro-Fusion Weldable Joint/fitting for PE pipe/waste water pipe/pre-insulated pipe

 

Product Description

More than 15 years of production experience
Organizer of the National Symposium on the Production and Application of Electro-fusion welding belt
Recipient of utility model patent for electric fusion sleeve
Exporting the electro-fusion weldling tape to Turkey, Sudan, UAE, Japan, Russia, Kazakhsatan and other countries with good feedback.




Electrofusion weldable joint is a pre-cut high-quality HDPE sheet embeded with nicochrome net. It is used as polymer pipe welding materials or fittings, which is installed by a special electric heating welder.
The tape size can be customized. It can bu used for a big range of pipe diameter from 200mm.



Application:
1. District thermal heating system construction
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Hollow wall spiral pipe joint fitting
4.Structure pipe joint fitting
5.Steel reinforced spiral pipe joint fitting

Performance:
1. Adopt high-quality raw material: HDPE 2480 produced by China Petroleum &Chemical Corporation and High temperature resistance nicochrome net.
2.The tape/sheet are fully fused with the pipe after electric heating with good sealing effect, corrosion resistance and long life service.
3.Able to withstand axial forces initiated by axial movements of the pipe in the ground;
4.Able to withstand radial forces and bending moments;
5.Able to withstand effects of temperature and temperature variations.



 

Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final Test	Unit	Standard	Test Result	Result
Raw material density	g/cm 3	≥0.935	≤0.961	PASS
Raw material melt flow rate	g/10min	≤0.50	0.46	PASS
Appearance check	/	Inernal and external surfaces is clean and free from other defects.	Pass	PASS
Heat reversion	%	≤3;shall not show any cracks	0.89,No cracks	PASS
Tensile yield strength	Mpa	≥19	20.2	PASS
Elongation at break	%	≥350	656	PASS
Stress crack resistance	h	≥300	Pass	PASS