HDPE Electrofusion Sleeve Tape for Pre-Insulated Pipe Girth Welding

• Customization: Available
• Material: HDPE/PE
• Connection: Welding
• Model NO.: 200-3000mm
• Surface Treatment: Without Treatment
• Head Type: Round
• Applicationpipeline Joint Closure: Pipeline Joint Closure
• Usage: Weld HDPE Pipe
• Thickness: 2-18mm
• Certify: En253, En448, En728, ISO1133, ISO8501-1. ISO9001
• Width: 100-700mm
• Transport Package: Standard Package
• Specification: 1200.00cm *1000.00cm * 1000.00cm
• Trademark: Huashida
• Origin: Qingdao China
• HS Code: 8477209000
• Production Capacity: 2000sets/Day
• Package Size: 1200.00cm * 1000.00cm * 1000.00cm
• Package Gross Weight: 1000.000kg

Product Description

HDPE Electrofusion Sleeve tape for Pre-Insulated Pipe Girth Welding
 

Product Description

 

 

It is a kind of connecting pipe fitting what is widely used on anti-corrosion, especially on Directly buried steel reinforced corrugated pipes field joint.  It is made by Polyethylene sheets complex with the electro-fusion wire.

 

 

Product Parameters

Pipe OD(mm)			Specification (DNxWxT)mm			Length (mm)
E/F TAPE DN200			200X200X5			900
E/F TAPE DN250			250X200X5			1060
E/F TAPE DN300			300X200X5			1240
E/F TAPE DN350			350X200X5			1410
E/F TAPE DN400			400X200X5			1590
E/F TAPE DN450			450X300X7			1820
E/F TAPE DN500			500X300X7			1990
E/F TAPE DN500			500X350X7			1990
E/F TAPE DN600			600X300X7			2350
E/F TAPE DN600			600X350X7			2350
E/F TAPE DN700			700X300X7			2690
E/F TAPE DN700			700X350X7			2690
E/F TAPE DN800			800X350X7			3030
E/F TAPE DN900			900X400X9			3430
E/F TAPE DN1000			1000X400X9			3780
E/F TAPE DN1100			1100X400X9			4185
E/F TAPE DN1200			1200X400X9			4585
E/F TAPE DN1300			1300X450X9			5010
E/F TAPE DN1400			1400X450X9			5430
E/F TAPE DN1500			1500X450X9			5640
E/F TAPE DN1600			1600X450X9			6080
E/F TAPE DN1800			1800X450X9			6730
E/F TAPE DN2000			2000X450X9			7435
E/F TAPE DN2200			2200X450X9			8150
	Technical Data:
	All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
	Final Test	Unit		Standard	Test Result		Result
	Raw material density	g/cm^3		≥0.935	≤0.961		PASS
	Raw material melt flow rate	g/10min		≤0.50	0.46		PASS
	Appearance check	/		Inernal and external surfaces is clean and free from other defects.	Pass		PASS
	Heat reversion	%		≤3;shall not show any cracks	0.89,No cracks		PASS
	Tensile yield strength	Mpa		≥19	20.2		PASS
	Elongation at break	%		≥350	656		PASS
	Stress crack resistance	h		≥300	Pass		PASS

Application Scenarios

Application:
1.    District thermal heating system construction,
2.    Pre-insulated pipes field joint welding and oil pipes joint welding;
3.    Preinsulated bonded pipe system for directly buried hot water networks;
4.    Three PE/PP layers with foam jacket insulation pipes connection;
5.    Steel pipes anti-corrosion etc.

Packaging & Shipping