Polyethylene Electric Heating Fusion Wrap/Sheet for Welding Closure/Connecting/Jointing Pre Insulated Pipe

• Customization: Available
• Application: Pipeline Joint Closure
• Connection: Pre Insulated Pipe
• Model NO.: HSD
• Pipe Diameter: 200-3000mm
• Transport Package: Standard Package
• Specification: EN253, EN448, EN728, ISO1133, ISO8501-1. ISO9001
• Trademark: HSD
• Origin: Qingdao, China
• HS Code: 3901902000
• Production Capacity: 2000sets/Day

Product Description

Polyethylene Electric Heating Fusion Wrap/Sheet for welding closure/connecting/jointing pre-insulated Pipe

1. More than 15 years of production experience
2. The organizer of the National Symposium on the Production and Application of Electro-fusion welding belt
3. Recipient of utility model patent for electric heating sleeve
4. Exporting the electro-fusion welding tape to Turkey, Sudan, UAE, Japan, Russia, Kazakhstan and other countries.

Electricfusion tape is a pre-cut high-quality HDPE sheet embedded with nicochrome net.  It is used as polymer pipe welding materials or fittings, which is installed by a special electric heating welder.
The tape size can be customized. It can be used for a big range of pipe diameter from 200mm.








Application:
1. District thermal heating system construction
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Hollow wall spiral pipe joint fitting
4. Structure pipe joint fitting
5. Steel reinforced spiral pipe joint fitting

Performance:
1. Adopt high-quality raw material: HDPE 2480 produced by China Petroleum &Chemical Corporation and High-temperature resistance nicochrome net.
2. Fully fused with the pipe after electric heating with good sealing effect, corrosion resistance and long life service.
3. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
4.Able to withstand radial forces and bending moments;
5. Able to withstand the effects of temperature and temperature variations.


Easy welding parameter set up . The fusion welder can work with 380V or 220V.





Test report

 

Final Test	Unit	Standard	Test Result	Assess
HDPE Raw material density	g/cm 3	≥0.935	0.961	OK
Raw material melt flow rate	g/10min	≤0.50	0.46	OK
Appearance check	/	Internal and external surfaces are clean and free from other defects.	OK	OK
Heat reversion	%	≤3; shall not show any cracks	0.89, No cracks	OK
Tensile yield strength	Mpa	≥19	20.2	OK
Elongation at break	%	≥350	656	OK
Stress crack resistance	h	≥300	OK	OK

Electro-fusion Girth Welding Closure Specification(mm)
For thermal pre-insulated pipe

HDPE Casing Outside Diameter	Length	Width	Thickness
220	840	500	5
250	935	500	5
315	1139	550	5
365	1296	550	6
420	1486	550	7
500	1720	550	8
550	1877	550	9
600	2034	600	9
655	2200	600	10
760	2500	600	10
850	2810	600	10
960	3165	600	10
1055	3460	600	12
1155	3776	600	14
1380	4485	600	15

Remark: Order size can be as the requirements of customers.

Workshop



Customer inspection&Delivery









 

 Our factory locates in Cheng yang Industrial area, Qingdao, Shandong Province.  we have been approved and got certificate ISO90001:2008 by SGS. All the customers are welcome to visit the factory.